Description

Note: NVMe 2242 M-Key MakerDisk SSD 512GB, 256GB, and 128GB shipped from 1st January 2024 onwards are loaded with the latest Raspberry Pi OS (64-bit) - Bookworm (release date: 5th December 2023). We have tested all capacities of MakerDisk NVMe 2242 with this PCIe HAT and Raspberry Pi 5, and they all work.

Note: The bootloader of Raspberry Pi 5 needs to be updated to Version: 30de0ba5 – 2024/01/5 to enable the NVMe driver and boot from it. Please refer to this tutorial to update the bootloader of Raspberry Pi 5. Of course, you will need a microSD card to do that.

Note: This page contains 3 different PCIe HAT versions and MakerDisk SSD bundle variants. Please select the preferred variant.


X1000	X1001	X1003

This PCIe HAT series unlocks the true potential of the Raspberry Pi 5 by leveraging its new PCIe interface. This innovative add-on board transforms your Raspberry Pi into a high-performance computing powerhouse, thanks to its compatibility with NVMe M.2 SSDs.

Blazing-fast data transfers: Ditch the sluggishness of traditional storage solutions. The X1000 harnesses the power of PCIe, offering significantly higher bandwidth than the Raspberry Pi's standard USB interface. This translates to dramatically faster data transfer speeds, ideal for large file transfers, and database management applications. NVMe M.2 SSDs, with their lightning-fast read and write speeds, further amplify the performance gains, making the Raspberry Pi a true contender for resource-intensive tasks.

Ultra-fast booting and improved responsiveness: The X1000 paired with an NVMe SSD slash boot times, allowing your Raspberry Pi to run in a flash. This translates to improved responsiveness across the entire system, whether launching applications, opening files, or multitasking between different tasks. Your Raspberry Pi will feel snappier and more efficient than ever before.

Flexibility and expandability: The X1000 isn't just about speed. It also offers a level of flexibility and expandability that opens up a world of possibilities for your Raspberry Pi projects. The shield remains compatible with other HATs, allowing you to stack functionalities like cameras, sensors, and displays on top of the storage boost. Additionally, the reserved space for a POE (Power over Ethernet) module allows for powering the Raspberry Pi and the shield directly through a network cable, eliminating the need for a bulky power adapter.

The X1000 shield is more than just a hardware upgrade. It's a gateway to unlocking the full potential of the Raspberry Pi 5, transforming it into a versatile and powerful computing platform for a wide range of applications.

Installation Guide

Note: You can also install this PCIe HAT with the official active cooler and case,

X1000: Need to remove the fan and top case cover
X1001: Cannot be used with the official case
X1003: Need to remove fan only (can replace with official active cooler)

Compatibility:

So far we have tested the following MakerDisk NVMe SSD and they all boot up with this HAT on Raspberry Pi 5 (updated bootloader):

Warranty Period: 12 months

Features

Compatible with other HAT shields. (except for X1003)
FFC length is only 30mm.
Supports installation of the official active cooler.
Minimalist design, easy to install
With ACT LED indicator:
- On: Power OK/Standby
- Flashing: Reading/Writing
Support NVME Length:
- X1000: 2230/2242
- X1001: 2230/2242/2260/2280
- X1003: 2230/2242
No limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS.
Power:
- X1000: 40-pin header connections automatically supply power from GPIO, avoiding power supply issues for large-capacity SSDs.
- X1001: Can power the HAT directly from the FFC PCIe ribbon (providing a maximum of 5W of continuous power).
- X1003: Supports additional GPIO power supply in addition to FPC power supply.

Packing List

X1000 + NVMe SSD
- 1 x X1000 NVMe SSD Hat
- 1 x NVMe 2242 M-Key MakerDisk SSD (based on your preferred capacity)
- 6 x M2.5 Screws (5mm)
- 3 x M2.5 F/F Spacers (14.5mm)
- 1 x M2 Screws (4mm)
- 1 x PCIe FFC Cable (30mm)

X1000 HAT Only
- 1 x X1000 NVMe SSD Hat
- 6 x M2.5 Screws (5mm)
- 3 x M2.5 F/F Spacers (14.5mm)
- 1 x M2 Screws (4mm)
- 1 x PCIe FFC Cable (30mm)

X1001 + NVMe SSD
- 1 x X1001 NVMe SSD Hat
- 1 x NVMe 2242 M-Key MakerDisk SSD (based on your preferred capacity)
- 6 x M2.5 Screws (5mm)
- 3 x M2.5 F/F Spacers (17mm)
- 1 x M2 Screws (4mm)
- 1 x PCIe FFC Cable (30mm)

X1001 HAT Only
- 1 x X1001 NVMe SSD Hat
- 3 x M2.5 Screws (5mm)
- 3 x M2.5 F/F Spacers (17mm)
- 1 x M2 Screws (4mm)
- 1 x PCIe FFC Cable (30mm)

X1003 + NVMe SSD
- 1 x X1003 NVMe SSD Hat
- 1 x NVMe 2242 M-Key MakerDisk SSD (based on your preferred capacity)
- 1 x M2.5 Screws (13mm)
- 1 x M2 Screws (4mm)
- 1 x PCIe FFC Cable (22mm)